6 Reasons You Need to Get a New Inverter Battery

On Mar 8, 2021

A battery is an integral component of Power backup system; it not only helps in better performance of an inverter but also increases its shelf- life. An inverter battery can be defined as a device that is designed to provide small amounts of current for a long duration of time. A battery is a vital part of electrical devices and appliances and is used in our everyday life. Therefore, regular maintenance and care of an inverter battery is extremely important.

An inverter battery comes with a limited life span. Certain factors can shorten the life of an inverter battery, which can cause battery failure. Given the role an inverter battery plays and will continue to play in our everyday life, it is important for every one of us to have a basic understanding of the reasons that can lead to a battery failure. Some of the common reasons have been listed down below:

Elevated Temperatures

Expected battery life is specified by the manufacturers as the inverter batteries will be installed at an average temperature of 25°C. Elevated temperature is responsible for reducing battery life. An increase in the temperature by 10°C can reduce the lead-acid battery life by 50% or more.

Overcharging of a Battery

Overcharging by the battery charging system can cause gassing and high internal heat. Excessive gassing can lead to the removal of active materials from plates. At the same time, exposure to too much heat can also oxidise the positive plate material and warp the plates.

Undercharging of a Battery

A faulty charging system will not support the inverter battery at full charge. Severe undercharging allows the sulphate to settle on the plates and become hard. Thereby making it impossible to remove the sulphate particles by normal charging. An undercharged inverter battery may fail to deliver the required power needed for its application.

Over-Discharge of a Battery

Over-discharge can lead to hydration. Hydration can occur in a lead-acid battery that is over-discharged and not completely charged. Once hydration becomes evident, the cell gets permanently damaged.

Vibration

An inverter battery should be mounted securely. Vibrations in a battery can loosen the connection, crack the case, or damage the internal components.

Improper Storage of a Battery

Improper storage of wet cells beyond the manufacturer’s recommended duration of time can lead to sulfation which can decease the cell capacity and life.

Every inverter battery needs timely maintenance for uninterrupted and smooth operation and long life. Here are some useful battery maintenance tips you should know:

Always use a well-ventilated area for installation of an Inverter and battery. An inverter battery can easily heat up during charging or operation. Proper ventilation reduces chances of the battery heating up and water topping requirement.
After its installation, it is advisable to use an inverter battery on a regular basis. You should discharge the battery once a month and then recharge it.
You need to ensure that the water level is maintained between the minimum and maximum water limit. Always top-up the battery with distilled water only.
You need to keep the surface and sides of the battery clean and dust-free.
Keep the battery terminals corrosion-free by applying some petroleum jelly. The restricted flow of current can result in slow battery charging.

These are some tips that will help you in keeping your inverter batteries safe. You can shop for an inverter battery from a reliable brand like Luminous. It is the market leader for providing the best inverter battery for your home. Their batteries are optimally designed for long and frequent power cuts.

They offer three types of inverter batteries.

GEL Battery

GEL range of inverter batteries come with zero spillage risk. A GEL battery is built to be sturdy, and these are maintenance-free batteries. These batteries are valve-controlled, completely safe and environmental friendly.

Flat-Plate Battery

Like any other lead-acid battery, a flat-plate inverter battery is made of positive and negative plates. These batteries are an ideal choice for instant high current applications because of the large surface area of plates.

Tubular Plate Battery

A tubular plate battery can be defined as an inverter battery that is suitable for areas that experience long and fewer power cuts. These batteries are extremely reliable, and they come with a long stand-by life.